รายละเอียด E3S-CT11 2M OMRON ราคา 7000 บาท
แก้ไขล่าสุด : 05-08-2556 10:10:04
Sensing method | Through-beam |
---|---|
Sensing distance | 0 m to 30 m |
Standard sensing object | Opaque: 15 mm dia. Min. |
Directional angle |
Emitter:3 to 15 DEG Receiver:3 to 15 DEG |
Light source | Infrared LED (880nm) |
Power supply voltage | 10 to 30 VDC (ripple(p-p) 10% included) |
Current consumption | Emitter: 25mA DC Max., Receiver: 25mA DC Max. |
Control output (Output type) | NPN/PNP open collector output |
Control output (Load current) | 0 to 100 mA |
Control output (Residual voltage) |
(DC) 1.2 V Max. (NPN output, Load current 100mA Max.) (DC) 2 V Max. (PNP output, Load current 100mA Max.) |
Operation mode | Light-ON/Dark-ON selectable |
Load power supply voltage | 30 VDC Max. |
Protective circuit |
Surge suppressor Output short-cut protection Power supply reverse polarity protection |
Response time | 1 ms Max. |
Sensitivity setting | Single-turn adjustment |
Ambient illuminance | Incandescent lamp:5000 lux Max., Sunlight:10000 lux Max. |
Ambient temperature |
Operating: -25 to 55 CEL Storage: -40 to 70 CEL (with no icing or condensation) |
Ambient humidity |
Operating: 35 to 85 %RH Storage: 35 to 95 %RH (with no condensation) |
Insulation resistance | 20 M OHM Min. at 500 VDC between charged parts and the case |
Dielectric strength | 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 2000 Hz, 1.5-mm or 300m/s2 double amplitude for 0.5 hours each in X, Y, and Z directions |
Shock resistance | 1000m/s2 for 3 times each in X, Y, and Z directions |
Degree of protection |
IEC60529: IP67 Company standard: Oil-proof |
Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-5-2 |
Applicable standard (EC Directive (EMC Directive)) |
EMI: EN60947-5-2 Emission Enclosure: EN55011 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 CE marking: Equipped |
Connection method | Pre-wired models (Cable length: 2 m) |
Indicator | Light indicator(red), Stability indicator(green), Power indicator(red) |
Weight (packed state) | approx. 270 g |
Tightening torque | 1.18 N.m Max. (with M4 screw) |
Material (case) | Zinc diecast |
Material (lens) | Methacrylate resin |
Material (cover) | Polyethyl sulfon |
Material (mounting bracket) | Stainless steel(SUS304) |
Accessories |
Instruction manual, Mounting bracket(with screws), Adjustment driver |
รีวิวร้านค้า
ร้านค้า :
นโยบายของเว็บไซต์
นโยบายของเว็บไซต์ (Merchant Policy)
วิธีการชำระเงิน (Payment Method) อ่านทั้งหมด
• บัตรเครดิต / บัตรเดบิต | |
• โอนผ่านธนาคารแบบระบุเลขบัญชี | |
• เคาน์เตอร์เซอร์วิส |
การส่งสินค้า (Shipping information)
ภายในกรุงเทพฯ ระยะใกล้จัดส่งโดยใช้รถยนต์
ระยะไกล หรือต่างจังหวัด ส่งทางไปรษณีย์
รายละเอียดบริษัท (Company Detail)
บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด
39/7 ถนนวุฒากาส แขวงตลาดพลู เขตธนบุรี
นำเข้า และจำหน่ายอุปกรณ์ไฟฟ้าในโรงงาน และบ้านเรือน... อ่านทั้งหมด
39/7 ถนนวุฒากาส แขวงตลาดพลู เขตธนบุรี
นำเข้า และจำหน่ายอุปกรณ์ไฟฟ้าในโรงงาน และบ้านเรือน... อ่านทั้งหมด
นโยบายการคืนสินค้า (Return Policy)
lewplc
เวลาให้บริการ (Business Hour)
จันทร์ - ศุกร์ 9.00 - 18.00 น. และ เสาร์ 9.30 - 17.00 น.
การรักษาข้อมูล (Privacy Policy)
เช็คราคา + เช็คของ ก่อนสั่งซื้อ
รับ training มิเตอร์วัดค่า อุปกรณ์วัดค่าต่างๆ ทุกชนิด
quality products at affordable prices.
If you have any questions or want to order our products please contact us.
สอบถามข้อมูลเพิ่มเติมได้ที่
ทุกวัน จันทร์-ศุกร์ เวลา 9.00-18.00 หรือ เสาร์ เวลา 9.30-17.00 น.
งานบริการด้านต่างๆ
-เขียนโปรแกรม เก็บข้อมูลต่างๆของเครื่องจักรลงใน computer link ระบบเครื่องจักร
-เข้าสู่ศูนย์กลางเพื่อการวิเคราะห์ข้อมูล เพื่อประโยชน์ต่างๆในด้านงานผลิต รวมถึงงานบริการ
ด้านการตรวจเช็คเครื่องจักรเสีย ระบบ PLC INVERTER มีปัญหา หรือต้องการเพิ่มประสิทธิภาพเครื่องจักร
และเรายังมี บริการรับซ่อมอุปกรณ์ PLC INVERTER CNC และ BOARD อิเล็คทรอนิคส์ต่างๆ
งานที่เราเชี่ยวชาญ
1.เขียนโปรแกรม และตรวจเช็ค PLC MITSUBISHI,OMRON,GE-FANUC,SIEMENS,ALLEN BRADLEY,SHILIN,FATEC
2.ติดตั้งระบบ INVERTER MITSUBISHI,FUJI,HYUNDAI,DANFOSS,TOSHIBA,HITACHI,OMRON
3.ทำระบบ SERVO MOTOR MITSUBISHI,PANASONIC
4.เขียน TOUCH SCREEN PROFACE,MITSUBISHI,HAKKO,FUJI,OMRON
5.ออกแบบระบบควบคุมอัตโนมัติ ในการต่างๆ
6.ทำบอร์ด SEVEN SEGMENT ,ระบบ POKAYOKE,SCADA เก็บข้อมูลต่างๆ
7.ออกแบบวงจรอิเล็คโทรนิคส์ ประเภทต่างๆ