TARAD Point
Thailand Web Stat
หมวดหมู่ทั้งหมด
K3MA-J-A2 AC/DC24 OMRON ราคา 6762 บาท #5358063
  • ชื่อสินค้า : K3MA-J-A2 AC/DC24 OMRON ราคา 6762 บาท
  • สินค้าในสต๊อก : สินค้าหมด
  • ระยะเวลาการขาย : จนกว่าของจะหมด
  • ค่าขนส่งขั้นต่ำ : คิดค่าจัดส่งตามราคาของไปรษณีย์ไทย (พัสดุ) 220.00 บาท  
  • ราคา : 6,762 บาท (สั่งซื้อออนไลน์ รับแต้มคืน 67 บาท(แต้ม))
  • ราคาผ่อน : ดูเพิ่ม
  • จำนวนสินค้า : (ระบุจำนวนสินค้าที่สั่งซื้อ)
  • บันทึกลงรายการโปรด
  •  
  • = 67 บาท (แต้ม)

Point คืออะไร ?

รายละเอียด K3MA-J-A2 AC/DC24 OMRON ราคา 6762 บาท
แก้ไขล่าสุด : 22-04-2556 11:15:18

 

Supply voltage 24 VAC (50/60Hz)
24 VDC
Operating voltage range 85% to 110% of the rated power supply voltage
Power consumption 4.5 W max. (24 VDC)
4.5 VA max (24 VAC)
Current measurement input (Input type) DC current
Current measurement input (Indication range) Range 0-20: -2.00 to 22.00 mA
Range 4-20: 0.00 to 22.00 mA
Current measurement input (Accuracy) Range 0-20: +/- 0.1%FS +/- 1digit max.
Range 4-20: +/- 0.1%FS +/- 1digit max.
(at 23 +/- 3 CEL)
Current measurement input (Input impedance) Range 0-20: 45 Ohm max.
Range 4-20: 45 Ohm max.
Voltage measurement input (Input type) DC voltage
Voltage measurement input (Measurement range) Range 0-5: 0-5 V
Range 1-5: 1-5 V
Range 5: +/-5 V
Range 10: +/- 10 V
Voltage measurement input (Indication range) Range 0-5: -0.500 to 5.500 V
Range 1-5: 0.500 to 5.500 V
Range 5: +/- 5.500 V
Range 10: -11.00 to 11.00 V
Voltage measurement input (Accuracy) Range 0-5: +/- 0.1%FS +/- 1digit max. (at 23 +/- 3 CEL)
Range 1-5: +/- 0.1%FS +/- 1digit max. (at 23 +/- 3 CEL)
Range 5: +/- 0.1%FS +/- 1digit max. (at 23 +/- 5 CEL)
Range 10: +/- 0.1%FS +/- 1digit max. (at 23 +/- 5 CEL)
Voltage measurement input (Input impedance) Range 0-5: 1 M Ohm min.
Range 1-5: 1 M Ohm min.
Range 5: 1 M Ohm min.
Range 10: 1 M Ohm min.
Comparative output (Contact output) Type: SPST-NO
Rated load (Resistive loads): 250VAC 5A, 30VDC 5A
Rated load (Inductive loads): 250VAC 1A, 30VDC 1A
Min. permissible load: 5 VDC 10 mA
Mechanical life: 5,000,000 operations min.(at a switching frequency of 1,200 times/min)
Electrical life: 100,000 operations min.(at rated load switching frequency of 10 times/min) at an ambient temperature of 20 CEL
Display method 7-segment digital display
Digits 5 digits
Character height 14.2 mm (green/red)
Zero suppress Leading zeros are not displayed.
Decimal point display position Selected with parameters
Key protect Operation/Adjustment Lockouts, Setting Level Lockouts, Setting Change Lockout, Forced-zero Lockout
Filters function Average processing
Input Compensation function Forced-zero, Zero-limit
Display function Scaling, Teaching, Display Color Selection, Max./Min. Hold
Outputs function Comparative Output Pattern, Hysteresis
Other function Parameter initialization
Ambient temperature Operating: -10 to +55 CEL
Storage: -25 to +65 CEL
(with no icing or condensation)
Ambient humidity Operating: 25 to 85 %RH
Storage: 25 to 85 %RH
Display range -19999 to 99999
A/D conversion method Double integral method
Sampling period 250 ms
Display refresh period Sampling period(sampling times multiplied by number of measurements for averaging if average processing is selected.)
Comparative output response time 750ms max
Insulation resistance 20 MOhm min.(at 500 VDC) between external terminals and case. Insulation provided between inputs, outputs and power supply.
Dielectric strength 2,000 VAC 1min (between external terminals and case)
Noise immunity +/- 480V at power supply terminals in normal mode+/- 1,500V at power supply terminals in common mode(waveform with 1-ns rising edge and pulse width of 1us/100 ns)
Vibration resistance Malfunction: Frequency: 10 to 55 Hz; Acceleration: 50m/s2 10 sweeps of 5 min each in X Y and Z directions
Shock resistance Malfunction: 100 m/s2 3 times each on 3 axes 6 directions
Degree of protection Front panel: NEMA4X for indoor use(equivalent to IP66)
Rear case: IP20
Terminals: IP00 + finger protection(VDE0106/100)
Memory protection EE-PROM(non-volatile memory) Number of rewrites: 100,000
Applicable standard (UL) Standard No.: UL61010C-1
File number: E200593
Applicable standard (CSA) Standard No.: CAN/CSA C22.2 No.1010.1(evaluated by UL)
Applicable standard (IEC) IEC61010-1
Applicable standard (EN) EN61010-1
Applicable standard (EC Directive (EMC Directive)) Standard No.: EN61326
EMI: EN61326 industrial applications
Emission Enclosure: CISPR 11 Group1 Class A:CISPRL 16-1/-2
Emission AC mains: CISPR 11 Group1 Class A:CISPRL 16-1/-2
EMS: EN61326 industrial applications
Immunity ESD: EN61000-4-2 (4 kV (contact) 8 kV (in air))
Immunity RF-interference: EN61000-4-3 (10 V/m sine wave amplitude modulation)
Immunity Fast Transient Burst: EN61000-4-4 (2 kV (power line) 1 kV (I/O signal line))
Immunity Surge: EN61000-4-5 (1 kV with line(power line), 2 kV with ground(power line))
Immunity Conducted Disturbance: EN61000-4-6 (3 V (0.15 to 80 MHz))
Immunity Power Frequency Magnetic: EN61000-4-8 (30 A/m (50 Hz) continuous time)
Voltage Dips and interruptions immunity: EN61000-4-11 (0.5 cycle 0/180 degrees 100% (rated voltage))
Accessories Watertight packing, Fixtures, Terminal cover, Unit stickers, Instruction manual
Weight Approx. 200 g
 
รีวิวร้านค้า
ร้านค้า :
ยังไม่มีคะแนนรีวิว

หน้าร้าน : http://.tarad.com

หมวดหมู่ของร้าน : -

เกี่ยวกับร้าน :

  นโยบายของเว็บไซต์
นโยบายของเว็บไซต์ (Merchant Policy)
วิธีการชำระเงิน (Payment Method) อ่านทั้งหมด
• บัตรเครดิต / บัตรเดบิต  
• โอนผ่านธนาคารแบบระบุเลขบัญชี     
• เคาน์เตอร์เซอร์วิส 
การส่งสินค้า (Shipping information)
ภายในกรุงเทพฯ ระยะใกล้จัดส่งโดยใช้รถยนต์ ระยะไกล หรือต่างจังหวัด ส่งทางไปรษณีย์
รายละเอียดบริษัท (Company Detail)
บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด
39/7 ถนนวุฒากาส แขวงตลาดพลู เขตธนบุรี
นำเข้า และจำหน่ายอุปกรณ์ไฟฟ้าในโรงงาน และบ้านเรือน... อ่านทั้งหมด
นโยบายการคืนสินค้า (Return Policy)
lewplc
เวลาให้บริการ (Business Hour)
จันทร์ - ศุกร์  9.00 - 18.00  น. และ เสาร์  9.30 - 17.00 น. 
การรักษาข้อมูล (Privacy Policy)
เช็คราคา + เช็คของ ก่อนสั่งซื้อ   รับ training มิเตอร์วัดค่า อุปกรณ์วัดค่าต่างๆ ทุกชนิด       quality products at affordable prices. If you have any questions or want to order our products please contact us.                   สอบถามข้อมูลเพิ่มเติมได้ที่                ทุกวัน จันทร์-ศุกร์ เวลา 9.00-18.00 หรือ เสาร์ เวลา 9.30-17.00 น.  งานบริการด้านต่างๆ -เขียนโปรแกรม เก็บข้อมูลต่างๆของเครื่องจักรลงใน computer link ระบบเครื่องจักร -เข้าสู่ศูนย์กลางเพื่อการวิเคราะห์ข้อมูล เพื่อประโยชน์ต่างๆในด้านงานผลิต รวมถึงงานบริการ   ด้านการตรวจเช็คเครื่องจักรเสีย ระบบ PLC INVERTER มีปัญหา หรือต้องการเพิ่มประสิทธิภาพเครื่องจักร และเรายังมี บริการรับซ่อมอุปกรณ์ PLC INVERTER CNC และ BOARD อิเล็คทรอนิคส์ต่างๆ งานที่เราเชี่ยวชาญ 1.เขียนโปรแกรม และตรวจเช็ค PLC MITSUBISHI,OMRON,GE-FANUC,SIEMENS,ALLEN BRADLEY,SHILIN,FATEC 2.ติดตั้งระบบ  INVERTER MITSUBISHI,FUJI,HYUNDAI,DANFOSS,TOSHIBA,HITACHI,OMRON 3.ทำระบบ SERVO MOTOR MITSUBISHI,PANASONIC 4.เขียน TOUCH SCREEN PROFACE,MITSUBISHI,HAKKO,FUJI,OMRON 5.ออกแบบระบบควบคุมอัตโนมัติ ในการต่างๆ 6.ทำบอร์ด SEVEN SEGMENT ,ระบบ POKAYOKE,SCADA เก็บข้อมูลต่างๆ 7.ออกแบบวงจรอิเล็คโทรนิคส์ ประเภทต่างๆ