TARAD Point
Thailand Web Stat
หมวดหมู่ทั้งหมด
GLC2400-TC41-24V #5823494
  • ชื่อสินค้า : GLC2400-TC41-24V
  • สินค้าในสต๊อก : สินค้าหมด
  • ระยะเวลาการขาย : จนกว่าของจะหมด
  • ค่าขนส่งขั้นต่ำ : คิดค่าจัดส่งตามราคาของไปรษณีย์ไทย (พัสดุ) 220.00 บาท  
  • ราคา : 0 บาท
  • จำนวนสินค้า : (ระบุจำนวนสินค้าที่สั่งซื้อ)
  • บันทึกลงรายการโปรด
สอบถาม / สั่งซื้อสินค้า : 
02 1172995 , 099 0802197
แจ้งรหัสสินค้า : 5823494
เวลาทำการ จ-ศ 9.00-18.00
  •  
  • = 0 บาท (แต้ม)

Point คืออะไร ?

รายละเอียด GLC2400-TC41-24V
แก้ไขล่าสุด : 21-07-2558 12:35:58

Functional Specifications

Item/Model GLC2400-TC41-24V
Recommended Substitute
Type TFT Color LCD
Display Colors 256 colors (no blink)/ 64 colors (3-speed blink)
(software control)*1
Backlight CCFL (Service life: more than 50,000 at 24 hr. operation)
Resolution 640 × 480 pixels
Effective Display Area (mm) 149.8(W) × 112.3(H)
Brightness Control 4 levels of adjustment available via touch panel
Contrast Control -
Language Character Sets ASCII: (Code page 850) Alphanumeric (incl. European characters)
Chinese: (GB2312-80 codes) simplified Chinese fonts
Japanese: ANK 158, Kanji: 6962 (JIS Standards 1 & 2)
Korean: (KSC5601 - 1992 codes) Hangul fonts
Taiwanese: (Big 5 codes) traditional Chinese fonts
Text 8 × 8 dots 80 char. × 60 rows
8 ×16 dots 80 char. × 30 rows
16 × 16 dots 40 char. × 30 rows
32 × 32 dots 20 char. × 15 rows
Character Sizes*2 8 × 8 dots, 8 × 16 dots, 16 × 16 dots, 32 × 32 dots
Font Sizes Width can be expanded 1 to 8 times
Height can be expanded 1/2*3, 1 to 8 times
Application Memory 4MB FLASH EPROM
Data Backup Memory SRAM 256KB - uses lithium battery*4
Control Memory *5

Program Area: FLASH EPROM 128KB
Variable Area: SRAM 64KB*6 - uses lithium battery*4

Touch Panel Resolution 32 × 24 keys/ screen - 1 or 2 point touch
External Interfaces Serial Interface Asynchronous Transmission: RS-232C/ RS-422, 
Data Length: 7 or 8 bits, Stop bit: 1 or 2 bits, 
Parity: Odd or Even, 
Data Transmission Speed: 2400bps to 115.2Kbps, 187.5Kbps*7
Expansion Serial 
Interface
Asynchronous Transmission: RS-232C 
Data Length: 7 or 8 bits 
Stop Bit: 1 or 2 bits 
Parity: None, Odd or Even 
Data Transmission Speed: 2400bps to 38.4kbps
Network Interface IEEE802.3, 10BASE-T
CF Card Interface 1 slot
External 
CF Card Interface
CF Card Front Maintenance Unit Connector
Sound Output
Interface
External Speaker Connection (Terminal Block)
Monaural 1CH
Speaker Output 70mW (Rated Load: 8Ω, Frequency: 1kHz)
Sound Line Out Output 2.7Vp-p (Rated Load: 10kΩ)
Wire Gauge: AWG28 to AWG16
Remote Reset Input Remote Reset Input: 1 point,
Input Voltage: DC24V ±10%,
Input Current: 4mA (TYP), Min. Input Pulse Width: 2ms 
Operating Voltage: (When ON) Min. DC21.1V/ (When OFF) Max. DC3V
Isolation Method: Photocoupler Isolation
FLEX 
NETWORK
Communication 
Configuration
1:N
Connection 
Method
Multi-Drop Connection
Max. Distance 200m/channel at 6Mbps, 
100m/channel at 12Mbps
Communication 
Method
Cyclic Time Division, half-duplex
Communication 
Speed
6Mbps/ 12Mbps
Communication 
I/F
Differential, pulse-transformer isolation
Error Check Format, bit, CRC-12 verification
Max. Number 
of Nodes
63 (1008 I/O points)
Printer Interface Compatible with NECPC-PR201/PL, EPSON ESC/P24-J84(C), HP Laser Jet, PCL 4 command, EPSON PM/Stylus (6-color ink), EPSON Stylus (4-color ink) compatible printers*8
Tool Connector Asynchronous TTL level nonprocedure command I/F

Used for transferring data between the GLC application software and the GLC.
Used for data transfer with the 2-Port feature.

Used for a variety of devices, including a bar-code reader.
  1. Changing the "Colors" setting to "256 colors" will disable the blink feature on all your project screens. If you wish to use the blink feature, do not change this setting to "256 colors."
  2. The display font will differ depending on which (language) character, or which size you select.
  3. Only available when using "1/2 Byte Character" settings via software. (Only Japanese, Chinese, Taiwanese and Korean characters.)
  4. A Lithium battery's lifetime is:
    10 years when the battery's ambient temperature is under 40℃ 
    4.1 years when the battery's ambient temperature is under 50℃ 
    1.5 years when the battery's ambient temperature is under 60℃ 
    When used for backup: 
    Approximately 60 days, with a fully charged battery
    Approximately 6 days, with a half-charged battery
  5. The 128-KB program area is allotted in SRAM for online editing use.
  6. 64KB of Variable data area are supported by Revision 2 or later in GLC model. Prior to Revision 1 is 32KB. The revision code can be easily found using the GLC unit's rear face identification label or revision sticker. In the area titled "REV",the code is indicated by asterisks(*) or marked with a marker pen. Please go to the GLC User Manual for more details.
  7. SIEMENS SIMATIC S7-200/300/400 Series (MPI port only). Please contact your Pro-face sales representative for supported models and other details.
  8. Printers with only Windows drivers cannot be used. However, certain types of printers with both Windows® and DOS® drivers can be used. For details, contact your local GP distributor.

General Specifications

Item/Model GLC2400-TC41-24V
Recommended Substitute
Electrical Rated Voltage DC24V
Rated Voltage Range DC19.2 to DC28.8V
Power Consumption 28W or less
Allowable Voltage Drop 10ms or less
Voltage Endurance AC1000V, 20mA for up to 1 minute
(between charging and FG terminals)
Insulation Resistance

10MΩ or higher at DC500V
(between charging and FG terminals)

Environmental Ambient Operating Temperature*9 0 to 50℃
Storage Temperature -20 to 60℃
Ambient Humidity 10 to 90% RH
(non-condensing wetbulb temperature 39℃ or less)
Storage Humidity 10 to 90% RH
(non-condensing wetbulb temperature 39℃ or less)
Vibration Resistance Compatible with IEC61131-2 (JIS B 3502) Compliant
When vibration is NOT continuous:
10Hz to 57Hz 0.075mm, 57Hz to 150Hz 9.8m/s2
When vibration is continuous:
10Hz to 57Hz 0.035mm, 57Hz to 150Hz 4.9m/s2
X, Y, Z directions for 10 times (80min.)
Noise Immunity Noise Voltage: 1000Vp-p
Pulse Duration: 1µs
Rise Time: 1ns
(via noise simulator)
Electrostatic Discharge Immunity Contact discharge of 6kV (IEC 61000-4-2 Level 3)
Corrosive Gases Free of corrosive gases
Structural Grounding 100Ω or less, or your country's applicable standard
Ratings Equivalent to IP65f (JEM1030), NEMA#250 TYPE 4X/12*10
External Dimensions 215W × 170H × 60D
Weight 1.7kg (3.7lb) or less (main unit only)
Cooling Method Natural air circulation
  1. When installing the GLC in a cabinet or enclosure, the term “ambient operation temperature” indicates the cabinet or enclosure’s internal temperature. The LCD displays may occasionally blur when they are used for hours at over 40℃ ambient operating temperature. This is a temporary phenomenon. After the temperature returns to normal, the display will be restored to normal. The GLC's operation will not be affected even though the display is blurred.
  2. The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed for every environment. Be sure to confirm your work environment requirements prior to installation.

Dimensions

GLC2400-TC41-24V 外形寸法図
รีวิวร้านค้า
ร้านค้า :
ยังไม่มีคะแนนรีวิว

หน้าร้าน : http://.tarad.com

หมวดหมู่ของร้าน : -

เกี่ยวกับร้าน :

  นโยบายของเว็บไซต์
นโยบายของเว็บไซต์ (Merchant Policy)
วิธีการชำระเงิน (Payment Method) อ่านทั้งหมด
• บัตรเครดิต / บัตรเดบิต  
• โอนผ่านธนาคารแบบระบุเลขบัญชี     
• เคาน์เตอร์เซอร์วิส 
การส่งสินค้า (Shipping information)
ภายในกรุงเทพฯ ระยะใกล้จัดส่งโดยใช้รถยนต์ ระยะไกล หรือต่างจังหวัด ส่งทางไปรษณีย์
รายละเอียดบริษัท (Company Detail)
บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด
39/7 ถนนวุฒากาส แขวงตลาดพลู เขตธนบุรี
นำเข้า และจำหน่ายอุปกรณ์ไฟฟ้าในโรงงาน และบ้านเรือน... อ่านทั้งหมด
นโยบายการคืนสินค้า (Return Policy)
lewplc
เวลาให้บริการ (Business Hour)
จันทร์ - ศุกร์  9.00 - 18.00  น. และ เสาร์  9.30 - 17.00 น. 
การรักษาข้อมูล (Privacy Policy)
เช็คราคา + เช็คของ ก่อนสั่งซื้อ   รับ training มิเตอร์วัดค่า อุปกรณ์วัดค่าต่างๆ ทุกชนิด       quality products at affordable prices. If you have any questions or want to order our products please contact us.                   สอบถามข้อมูลเพิ่มเติมได้ที่                ทุกวัน จันทร์-ศุกร์ เวลา 9.00-18.00 หรือ เสาร์ เวลา 9.30-17.00 น.  งานบริการด้านต่างๆ -เขียนโปรแกรม เก็บข้อมูลต่างๆของเครื่องจักรลงใน computer link ระบบเครื่องจักร -เข้าสู่ศูนย์กลางเพื่อการวิเคราะห์ข้อมูล เพื่อประโยชน์ต่างๆในด้านงานผลิต รวมถึงงานบริการ   ด้านการตรวจเช็คเครื่องจักรเสีย ระบบ PLC INVERTER มีปัญหา หรือต้องการเพิ่มประสิทธิภาพเครื่องจักร และเรายังมี บริการรับซ่อมอุปกรณ์ PLC INVERTER CNC และ BOARD อิเล็คทรอนิคส์ต่างๆ งานที่เราเชี่ยวชาญ 1.เขียนโปรแกรม และตรวจเช็ค PLC MITSUBISHI,OMRON,GE-FANUC,SIEMENS,ALLEN BRADLEY,SHILIN,FATEC 2.ติดตั้งระบบ  INVERTER MITSUBISHI,FUJI,HYUNDAI,DANFOSS,TOSHIBA,HITACHI,OMRON 3.ทำระบบ SERVO MOTOR MITSUBISHI,PANASONIC 4.เขียน TOUCH SCREEN PROFACE,MITSUBISHI,HAKKO,FUJI,OMRON 5.ออกแบบระบบควบคุมอัตโนมัติ ในการต่างๆ 6.ทำบอร์ด SEVEN SEGMENT ,ระบบ POKAYOKE,SCADA เก็บข้อมูลต่างๆ 7.ออกแบบวงจรอิเล็คโทรนิคส์ ประเภทต่างๆ