TARAD Point
Thailand Web Stat
หมวดหมู่ทั้งหมด
E2EM-X7D2-N OMROM ราคา 1200 บาท #5947700
  • ชื่อสินค้า : E2EM-X7D2-N OMROM ราคา 1200 บาท
  • สินค้าในสต๊อก : สินค้าหมด
  • ระยะเวลาการขาย : จนกว่าของจะหมด
  • ค่าขนส่งขั้นต่ำ : คิดค่าจัดส่งตามราคาของไปรษณีย์ไทย (พัสดุ) 220.00 บาท  
  • ราคา : 1,500 บาท (สั่งซื้อออนไลน์ รับแต้มคืน 15 บาท(แต้ม))
  • จำนวนสินค้า : (ระบุจำนวนสินค้าที่สั่งซื้อ)
  • บันทึกลงรายการโปรด
  •  
  • = 15 บาท (แต้ม)

Point คืออะไร ?

รายละเอียด E2EM-X7D2-N OMROM ราคา 1200 บาท
แก้ไขล่าสุด : 03-04-2557 11:34:47
Cylinder type sensing head size M18
Type Shielded
Sensing method Inductive type
Sensing distance 7 mm -10% to +10%
Setting distance 0 to 5.6 mm
Differential distance 10% Max. of sensing distance
Sensing object Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object Iron 18*18*1mm
Response frequency 0.5 kHz (average)
Power supply voltage 12 to 24 VDC (ripple(p-p) :10% Max.)
Operating voltage range 10 to 30 VDC
Leakage current 0.8 mA Max.
Control output (Output type) DC 2-wire models with polarity
Control output (Switching capacity) 3 to 100 mA
Control output (Residual voltage) 3 V Max. (under load current with cable length of 2m)
Indicator Operation indicator(red)
Operation mode NC
Protective circuit Surge suppressor
Output short-cut protection
Standard or Different frequency Standard
Ambient temperature Operating: -25 to 70 CEL
Storage: -40 to 85 CEL
(with no icing or condensation)
Ambient humidity Operating: 35 to 95 %RH
Storage: 35 to 95 %RH
(with no condensation)
Temperature influence +-10% Max. of sensing distance in temperature range of -25 to +70CEL
(As the basis for sensing distance of 23CEL)
Voltage influence +-1% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)
Insulation resistance 50 M OHM Min. at 500VDC between charged parts and the case
Dielectric strength 1000 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 1000m/s2 for 10 times each in X, Y, and Z directions
Degree of protection IEC60529: IP67
Company standard: Oil-proof
Applicable standard (EC Directive (Low Voltage Directive)) EN60947-1
EN60947-5-2
Applicable standard (EC Directive (EMC Directive)) EMI: EN60947-5-2
Emission Enclosure: CISPR11 Group 1 class A
EMS: EN60947-5-2
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Conducted Disturbance: IEC61000-4-6
Immunity Burst: IEC61000-4-4
CE marking: Equipped
Applicable standard (CCC mark) Not equipped
Connection method Pre-wired models (Cable length: 5 m)
Weight (Packed state) approx. 265 g
Material (case) Brass nickel plating
Material (sensing surface) PBT
Material (clamping nuts) Brass nickel plating
Material (toothed washer) Iron zinc plating
Accessories Instruction manual

รีวิวร้านค้า
ร้านค้า :
ยังไม่มีคะแนนรีวิว

หน้าร้าน : http://.tarad.com

หมวดหมู่ของร้าน : -

เกี่ยวกับร้าน :

  นโยบายของเว็บไซต์
นโยบายของเว็บไซต์ (Merchant Policy)
วิธีการชำระเงิน (Payment Method) อ่านทั้งหมด
• บัตรเครดิต / บัตรเดบิต  
• โอนผ่านธนาคารแบบระบุเลขบัญชี     
• เคาน์เตอร์เซอร์วิส 
การส่งสินค้า (Shipping information)
ภายในกรุงเทพฯ ระยะใกล้จัดส่งโดยใช้รถยนต์ ระยะไกล หรือต่างจังหวัด ส่งทางไปรษณีย์
รายละเอียดบริษัท (Company Detail)
บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด
39/7 ถนนวุฒากาส แขวงตลาดพลู เขตธนบุรี
นำเข้า และจำหน่ายอุปกรณ์ไฟฟ้าในโรงงาน และบ้านเรือน... อ่านทั้งหมด
นโยบายการคืนสินค้า (Return Policy)
lewplc
เวลาให้บริการ (Business Hour)
จันทร์ - ศุกร์  9.00 - 18.00  น. และ เสาร์  9.30 - 17.00 น. 
การรักษาข้อมูล (Privacy Policy)
เช็คราคา + เช็คของ ก่อนสั่งซื้อ   รับ training มิเตอร์วัดค่า อุปกรณ์วัดค่าต่างๆ ทุกชนิด       quality products at affordable prices. If you have any questions or want to order our products please contact us.                   สอบถามข้อมูลเพิ่มเติมได้ที่                ทุกวัน จันทร์-ศุกร์ เวลา 9.00-18.00 หรือ เสาร์ เวลา 9.30-17.00 น.  งานบริการด้านต่างๆ -เขียนโปรแกรม เก็บข้อมูลต่างๆของเครื่องจักรลงใน computer link ระบบเครื่องจักร -เข้าสู่ศูนย์กลางเพื่อการวิเคราะห์ข้อมูล เพื่อประโยชน์ต่างๆในด้านงานผลิต รวมถึงงานบริการ   ด้านการตรวจเช็คเครื่องจักรเสีย ระบบ PLC INVERTER มีปัญหา หรือต้องการเพิ่มประสิทธิภาพเครื่องจักร และเรายังมี บริการรับซ่อมอุปกรณ์ PLC INVERTER CNC และ BOARD อิเล็คทรอนิคส์ต่างๆ งานที่เราเชี่ยวชาญ 1.เขียนโปรแกรม และตรวจเช็ค PLC MITSUBISHI,OMRON,GE-FANUC,SIEMENS,ALLEN BRADLEY,SHILIN,FATEC 2.ติดตั้งระบบ  INVERTER MITSUBISHI,FUJI,HYUNDAI,DANFOSS,TOSHIBA,HITACHI,OMRON 3.ทำระบบ SERVO MOTOR MITSUBISHI,PANASONIC 4.เขียน TOUCH SCREEN PROFACE,MITSUBISHI,HAKKO,FUJI,OMRON 5.ออกแบบระบบควบคุมอัตโนมัติ ในการต่างๆ 6.ทำบอร์ด SEVEN SEGMENT ,ระบบ POKAYOKE,SCADA เก็บข้อมูลต่างๆ 7.ออกแบบวงจรอิเล็คโทรนิคส์ ประเภทต่างๆ