Peltier Cooled Incubator IPP 200.
from +5 °C up to +60 °C
w x h x d: 550 x 600 x 490 mm (+38 mm for handle)
Standard equipment
Ventilation and Control
-
forced ventilation by Peltier fan
-
adaptive, fuzzy-supported microprocessor PIDcontroller, for stepless control of Peltier-heating-/ cooling system - without refrigerant
-
autodiagnostic system with fault indication
-
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
-
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
-
integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
-
multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
tempering profiles of up to 40 ramps
time- and set-point dependent operation
-
digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
-
resolution of display for set value and actual value 0,1 °C
-
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
-
programme stored on power failure
-
parallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentation
-
serial interface RS 232 including MEMMERT Software „Celsius 2007" for programming and documentation
-
chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
-
incl. works calibration certificate for +10 °C and +37 °C
Multiple Overtemperature Protection
-
with audible and visual alarm
-
independently working, digitally adjustable electronic microprocessor overtemperature controller TWW protection class 3.3 maximum value for overtemperature, minimum value for undertemperature
-
additional integral over- and undertemperature protection "ASF" (Auto-Safety-Function) automatically following the set value at a preset tolerance range; audible alarm is activated in case of over- or undertemperature, heating function is switched off in case of overtemperature - cooling function is switched off in case of undertemperature
-
resolution of display and setting accuracy: 0,1 °C
Textured Stainless Steel Casing
-
w x h x d: 550 x 600 x 490 mm (+38 mm for handle)
-
fully insulated stainless steel door with double locking and 4-point adjustment
-
inner glass door
-
rear zinc-plated steel
Interior - Heating Concept
-
w x h x d: 400 x 320 x 250 mm, 32 l
-
fully insulated, easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing
-
energy-saving Peltier heating-/cooling system (heat pump principle) integrated in the rear
-
1 perforated stainless steel shelf, non-tipping
Temperature Range
Voltage / Power Rating
-
230 V (+/- 10%), 50/60 Hz
-
ca. 125 W (during heating and cooling)
Temperature Distribution
-
better than +/-0,4 °C (at 10-37 °C)
Temperature Variation
-
better than +/-0,1 °C (with time)
|