TARAD Point
Thailand Web Stat
หมวดหมู่ทั้งหมด
GP-3600T FLEX NETWORK Model: AGP3600-T1-AF-FN1M PROFACE #5824743
  • ชื่อสินค้า : GP-3600T FLEX NETWORK Model: AGP3600-T1-AF-FN1M PROFACE
  • สินค้าในสต๊อก : สินค้าหมด
  • ระยะเวลาการขาย : จนกว่าของจะหมด
  • ค่าขนส่งขั้นต่ำ : คิดค่าจัดส่งตามราคาของไปรษณีย์ไทย (พัสดุ) 220.00 บาท  
  • ราคา : 0 บาท
  • จำนวนสินค้า : (ระบุจำนวนสินค้าที่สั่งซื้อ)
  • บันทึกลงรายการโปรด
สอบถาม / สั่งซื้อสินค้า : 
02 1172995 , 099 0802197
แจ้งรหัสสินค้า : 5824743
เวลาทำการ จ-ศ 9.00-18.00
  •  
  • = 0 บาท (แต้ม)

Point คืออะไร ?

รายละเอียด GP-3600T FLEX NETWORK Model: AGP3600-T1-AF-FN1M PROFACE
แก้ไขล่าสุด : 28-07-2558 09:50:11

GP-3600T FLEX NETWORK  Model: AGP3600-T1-AF-FN1M PROFACE

Functional Specification

Display Type TFT Color LCD
Display Size 12.1"
Resolution 800 X 600 pixels (SVGA)
Dot pitch W0.3075 X H0.3075mm [W0.01 X H0.01in.]
Effective Display Area W248 X H186.5mm [W9.76 X H7.34in.]
Display Colors 65,536 Colors (No blink)/16,384 Colors (Blink)
Backlight When GP Revision 5 and later:
LED (When replacement is required,contact your local GP distributor)
When GP Revision 5 and earlier:
CCFL (Replaceable)*1
Brightness Control 8 Levels (Adjusted with the touch panel)
Contrast Control Not applicable
Backlight Service Life 50,000 hrs. or more (continuous operation at 25℃ before backlight brightness decreases to 50% or backlight starts to blink)
Language Fonts Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.
Character Sizes Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font Sizes Standard font: Width can be expanded up to 8 times., Height can be expanded up to 8 times.*2
Text 8 x 8 dots 100 char. X 75 rows
8 x 16 dots 100 char. X 37 rows
16 x 16 dots 50 char. X 37 rows
32 x 32 dots 25 char. X 18 rows
Control Memory Variable Area SRAM 64 KB (uses lithium battery)*3
Program Area FLASH EPROM 132 KB
Number of Step Equivalent to 15,000 steps*4
Application Memory FLASH EPROM 16 MB*5
Data Backup SRAM 320KB (uses lithium battery)*3
Clock Accuracy ±65 sec./month (deviation at room temperature and power is OFF)*6
Touch Panel Type Resistive Film (analog)
Touch Panel Resolution 1,024 X 1,024
Touch Panel Service Life 1,000,000 times or more
Interface Serial (COM1) RS-232C/422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: D-Sub9 (plug)
Serial (COM2) RS-422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5kbps (MPI), Connector: D-Sub9 (socket)
Ethernet (LAN) IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45)×1
Expansion Unit 1 Communication Expansion Unit x 1
Expansion Unit 2 VM/DVI Input Expansion Unit x 1
USB (TYPE-A) Conforms to USB1.1.(TYPE-A conn.) X 2, Power Supply Voltage: DC5V±5%, Output Current: 500mA (max.), Communication Distance: 5m (max.)
Expansion Memory Function Expansion Memory x 1 (Inside interface cover)
CF Card Compact Flash CF Card Slot (TYPE-II) X 1
Sound Output Speaker Output, 70mW (Rated Load: 8Ω, Frequency: 1kHz), Connector: 2-piece terminal block (AUX) X 1
AUX Input/Output Alarm Output, RUN Output, Buzzer Output, Rated Voltage: DC24V, Rated Current: 50mA, Remote Reset Input, Input Voltage: DC24V, Connector: 2-piece terminal block (AUX) X 1
Control FLEX NETWORK Type Bit variable input: 512 points, Bit variable output: 512 points, Integer variable input: 128 points, Integer variable output: 128 points, Connector: 6pin*7
  1. About the differences in a CCFL model and a LED model.
  2. Other font sizes can be set up with the Editor software.
  3. A Lithium battery's lifetime is:
    10 years when the battery's ambient temperature is 40 oC or less.
    4.1 years when the battery's ambient temperature is 50 oC or less.
    1.5 years when the battery's ambient temperature is 60 oC or less.
    When used for back up: Approximately 100 days, with a fully charged battery.
    Approximately 6 days, with a half-charged battery.
  4. Up to 60,000 steps can be converted in software. However, this reduces internal memory capacity (for screen data) by 1 MB.
  5. Capacity available for user application. 8 MB available if the revision of the unit is earlier than Rev. 4, or GP-Pro EX Ver. 2.5 or earlier is used.
  6. Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
  7. When using GP-Pro EX under Ver.2.50, Bit variable enables to input/output 256 points. When using GP-Pro EX under Ver.2.50, Integer variable enables to input/output 64 points.

General Specification

International Safety Standards
Rated Input Voltage AC100 to 240V
Input Voltage Limits AC85 to 264V
Rated frequency 50/60Hz
Rated frequency range 40 to 72Hz
Allowable Voltage Drop Shorter than 1cycle (Voltage drop interval must be 1 second or more.)
Power Consumption AC 100 V: 90 VA or less, AC 240 V: 108 VA or less
In-Rush Current 60A (max.)
Voltage Endurance AC1,500V 20mA for 1 minute, (between charging and FG terminals)
Insulation Resistance DC500V 10MΩ (min.), (between charging and FG terminals)
Surrounding Air Temperature 0 to 50 ℃
Storage Temperature -20 to +60℃
Ambient Humidity 10 to 90% RH (Wet bulb temperature: 39℃ max. - no condensation.)
Storage Humidity 10 to 90% RH (Wet bulb temperature: 39℃ max. - no condensation.)
Dust 0.1mg/m³ and below (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Atmosphere Free of corrosive gases
Air Pressure (altitude range) 800 to 1,114hPa (2,000 meters max.)
Vibration Resistance IEC/EN61131-2 compliant, 5 to 9Hz Single amplitude 3.5mm [0.14in.], 9 to 150Hz Fixed acceleration: 9.8m/s², X,Y,Z directions for 10 cycles (100 minutes)
Concussion Resistance IEC/EN61131-2 compliant, 147 m/s², X, Y, Z directions for 3 times
Noise Immunity Noise Voltage: 1,500Vp-p, Pulse Duration: 1µs, Rise Time: 1ns, (via noise simulator)
Electrostatic Discharge Immunity Contact Discarge Method: 6kV (IEC/EN61000-4-2 Level 3)
Grounding Functional grounding: Grounding resistance of 100Ω, 2mm² or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Structure Equivalent to IP65f NEMA #250 TYPE 4X/13 (Front surface of embedded panel)*8
Installation Configuration Embedded panel
Cooling Method Natural air circulation
Weight Approx. 3.2 kg [7 lb] or less (display unit only)
External Dimensions W313 X H239 X D56mm, [W12.32 X H9.41 X D2.20in.]
Panel Cut Dimensions W301.5 x H227.5 mm [W11.87 x H8.96 in.], Panel thickness area: 1.6 to 10 mm [0.06 to 0.39 in.]*9
  1. The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit's level of resistance is equivalent to these standards, oils that should have, no effect on the GP can possibly harm the unit. This can occur in areas where either, vaporized oils are present, or where low viscosity cutting oils are allowed to adhere, to the unit for long periods of time. If the GP's front face protection sheet becomes, peeled off, these conditions can lead to the ingress of oil into the GP and separate, protection measures are suggested., Also, if non-approved oils are present, it may cause deformation or corrosion of the, front panel’s plastic cover. Therefore, prior to installing the GP be sure to confirm the, type of conditions that will be present in the GP's operating environment., If the installation gasket is used for a long period of time, or if the unit and its gasket, are removed from the panel, the original level of the protection cannot be guaranteed., To maintain the original protection level, be sure to replace the installation gasket, regularly.
  2. Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.].
รีวิวร้านค้า
ร้านค้า :
ยังไม่มีคะแนนรีวิว

หน้าร้าน : http://.tarad.com

หมวดหมู่ของร้าน : -

เกี่ยวกับร้าน :

  นโยบายของเว็บไซต์
นโยบายของเว็บไซต์ (Merchant Policy)
วิธีการชำระเงิน (Payment Method) อ่านทั้งหมด
• บัตรเครดิต / บัตรเดบิต  
• โอนผ่านธนาคารแบบระบุเลขบัญชี     
• เคาน์เตอร์เซอร์วิส 
การส่งสินค้า (Shipping information)
ภายในกรุงเทพฯ ระยะใกล้จัดส่งโดยใช้รถยนต์ ระยะไกล หรือต่างจังหวัด ส่งทางไปรษณีย์
รายละเอียดบริษัท (Company Detail)
บริษัท ทริปเปิ้ล อี เทรดดิ้ง จำกัด
39/7 ถนนวุฒากาส แขวงตลาดพลู เขตธนบุรี
นำเข้า และจำหน่ายอุปกรณ์ไฟฟ้าในโรงงาน และบ้านเรือน... อ่านทั้งหมด
นโยบายการคืนสินค้า (Return Policy)
lewplc
เวลาให้บริการ (Business Hour)
จันทร์ - ศุกร์  9.00 - 18.00  น. และ เสาร์  9.30 - 17.00 น. 
การรักษาข้อมูล (Privacy Policy)
เช็คราคา + เช็คของ ก่อนสั่งซื้อ   รับ training มิเตอร์วัดค่า อุปกรณ์วัดค่าต่างๆ ทุกชนิด       quality products at affordable prices. If you have any questions or want to order our products please contact us.                   สอบถามข้อมูลเพิ่มเติมได้ที่                ทุกวัน จันทร์-ศุกร์ เวลา 9.00-18.00 หรือ เสาร์ เวลา 9.30-17.00 น.  งานบริการด้านต่างๆ -เขียนโปรแกรม เก็บข้อมูลต่างๆของเครื่องจักรลงใน computer link ระบบเครื่องจักร -เข้าสู่ศูนย์กลางเพื่อการวิเคราะห์ข้อมูล เพื่อประโยชน์ต่างๆในด้านงานผลิต รวมถึงงานบริการ   ด้านการตรวจเช็คเครื่องจักรเสีย ระบบ PLC INVERTER มีปัญหา หรือต้องการเพิ่มประสิทธิภาพเครื่องจักร และเรายังมี บริการรับซ่อมอุปกรณ์ PLC INVERTER CNC และ BOARD อิเล็คทรอนิคส์ต่างๆ งานที่เราเชี่ยวชาญ 1.เขียนโปรแกรม และตรวจเช็ค PLC MITSUBISHI,OMRON,GE-FANUC,SIEMENS,ALLEN BRADLEY,SHILIN,FATEC 2.ติดตั้งระบบ  INVERTER MITSUBISHI,FUJI,HYUNDAI,DANFOSS,TOSHIBA,HITACHI,OMRON 3.ทำระบบ SERVO MOTOR MITSUBISHI,PANASONIC 4.เขียน TOUCH SCREEN PROFACE,MITSUBISHI,HAKKO,FUJI,OMRON 5.ออกแบบระบบควบคุมอัตโนมัติ ในการต่างๆ 6.ทำบอร์ด SEVEN SEGMENT ,ระบบ POKAYOKE,SCADA เก็บข้อมูลต่างๆ 7.ออกแบบวงจรอิเล็คโทรนิคส์ ประเภทต่างๆ